Granted there’s not many people that can make use of this information, but the few people that are building Tesla Coils looking into higher-level analysis will definitely find this interesting. For the next-level course and follow-up, visit Dr Adrian Marsh’s site here: https://www.am-innovations.com/category/equipment/equipment-network-analyser/
Part 1: https://www.bitchute.com/video/mFjOoQ3aLzqG/ A brief and quite cobbled-together experiment following some preliminary long-range telluric testing performed the day prior. The experiment seems to suggest a unique transmission mode may indeed exist when two Tesla coils are used in tandem to transfer power between each-other. Part 2: https://www.bitchute.com/video/5vJpSnIpsgGs/ Turning up the power to the Tesla system …
Single Wire TMT + Bulb Lighting Experiments 8/9/22 Read More »
After a week of solid testing, and a hundred feet of wasted/cut coax, I’m finally honing in on a good procedure for building+tuning a Tesla Magnifying Transmitter.😙 Short version: Wind your secondary and extra coil to about 1.5x your target frequency.Measure each coil separately with a VNA or function generator and scope/meter until you have …
In prep for the upcoming through-the-ground communications experiments this month, I spent the last couple days fabricating a large Tesla Coil secondary out of UHMW polyethylene. Target frequency is just above the 160m HAM radio band, so about 2-2.4mc Using RG316 coax cable since it is silver coated and has a quite large surface area. …
Shop Notes – Building a new Tesla Coil for upcoming telluric experiments. Read More »
On the advice of Adrian Marsh, I modded my 3kw antenna tuner. Basically I needed a way to bypass all of the tuning elements on one of the outputs to make it easier to tune Tesla Coils with it. By adding a vacuum relay I am able to use one of the pushbuttons on the …